Results 1 to 1 of 1
-
04-27-2022, 12:37 AM #1
- Join Date
- Apr 2022
- Posts
- 1
Resin not sticking to build plate
Hi all, just bought a new Anycubic Photon Mono 4K and a bottle of their grey resin. Admittadly, i was optimistic, going straight with a miniature i got from the web and my own support settings / ChituBox settings, but i let it run overnight as it was an 8 hour job and i woke to find an empty build plate!
I then decided to run the test model from the supplied USB and the same thing has happened...
Does anyone have any suggestions or advice on what i could a have done wrong?
Thanks in advance.
Resin has changed after...
06-18-2024, 10:34 AM in General 3D Printing Discussion