Results 1 to 2 of 2
-
04-24-2022, 10:31 AM #1
- Join Date
- Apr 2022
- Posts
- 1
First layer and bed levelling issues
Hello!I am quite new to the 3d printing world as I recently got my ender 3 v2. To help with the bed levelling I installed jyersUi with 5x5 manual mesh leveling.The thing is, even though I have followed X tutorial videos on youtube on both how to tram/level the bed and how to do the mesh leveling I still can't get the first layer to stick unless I have a z-offset of about -0.2 mm or more.This is the case even if I make the paper almost stick to the plate when I set the mesh levelling. What could I be doing wrong?
-
04-25-2022, 06:51 AM #2
Sounds like you are doing every thing correctly.
The Newest Marlin 2.0.9.2 has a function " Configuration > Advanced Settings > Probe Offsets > Z-Probe Wizard " To Set your Probe offset to get that perfect 1st layer.
I have been manually using Probe offsets for 6 years now, only now with the new automated Z-Probe Wizard can I do this quickly and efficiently ...
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion