Results 1 to 10 of 12
Threaded View
-
04-17-2022, 07:04 PM #8
- Join Date
- Apr 2022
- Posts
- 9
So I have an update sortof...
I tried a bunch of other files I had printed in the past and it seemed like each layer had at least 1, sometimes 2 or 3 layer shifts each layer when printing. When I googled the layer shifting problem, 1 thing mentioned was overheating of the main board so I decided to check the fans inside.
Well, as I was tipping the printer on it's side, the print nozzle slid all the way over as if there was no resistance from the x-axis motor at all. Would this be normal? I wouldn't think so.
This is leading me to believe that the motor is bad and the improper x-axis movement is due to the weak motor not being able to move the print nozzle all the time. I've also seen that a bad x/y axis cable can cause jittery movement as well so I think I'm going to hit ebay and see if I can find a new motor and cable.
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)