Results 1 to 4 of 4
Threaded View
-
04-09-2022, 01:24 AM #4
- Join Date
- May 2020
- Posts
- 626
If you heat the nozzle be aware that it can melt the levelling paper supplied. You can heat the bed up to at least 95C witrhout it melting the levelling paper thingy.
It's 0.26mm thick or 8 thousands of an inch.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion