Results 1 to 1 of 1
-
04-06-2022, 07:29 PM #1
- Join Date
- Apr 2022
- Posts
- 2
Gap in the forward left side of all large prints
Hi, I am new to 3D printing and while I have figured out most of my issues this one has me confused. When printing a larger object I always have bad areas on the Fwd left hand corner as the photo shows! All of the other corners are nice and smooth. Any suggestions? I am printing with Hatchbox 1.75 Filament using a 4mm nozzle on a creator pro using Flashprint to slice with 195 degrees on the extruder and 60 degrees on the platform. When I print smaller items this is not an issue.
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)