Results 1 to 2 of 2
Thread: Printing problem Prusa i3
Threaded View
-
03-08-2022, 09:17 AM #2
- Join Date
- Jun 2014
- Posts
- 885
what print speeds are you using?
If you're pushing filament through the nozzle at a relatively high speed, it also can cool the nozzle down to the point where the filament will no longer extrude. It won't hurt your print to add another five degrees to the nozzle as a test.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion