Results 1 to 4 of 4
Thread: printing error
-
03-06-2022, 01:38 PM #1
- Join Date
- Feb 2022
- Posts
- 7
printing error
so ive been printing on an ender 3 since decemberish and things have been smooth, recently added a CL Touch to it and now my prints dont print properly. is there something i can do to fix this or am i doing something wrong? the picture is cheps bed leveling print
-
03-06-2022, 04:09 PM #2
It appears your nozzle is too high an needs to be lowered.
I use Z-Offset to lower the nozzle to get about .2mm above the bed. currently my Z-Offset is set at -0.50
I have had this setting from 1mm to -1mm to allow the nozzle to be in the print areaLast edited by Roberts_Clif; 03-06-2022 at 04:14 PM.
-
03-06-2022, 04:11 PM #3
- Join Date
- Feb 2022
- Posts
- 7
I’ve tried setting my offset but when I get to 0 the nozzle is touching the bed, I’m probably doing something wrong
-
03-06-2022, 04:16 PM #4
View this video
https://www.youtube.com/watch?v=y_1Kg45APko
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help