Results 1 to 10 of 16
Thread: Hyrel 3D System 30 - Impressive
-
10-30-2013, 09:34 PM #1
- Join Date
- Oct 2013
- Posts
- 259
Hyrel 3D System 30 - Impressive
I've seen a lot of quality in the 3D Printing industry over the last year, however this video really makes the Hyrel System 30 3D Printer look quite awesome. What do you think?
Features of Hyrel System 30:
Enclosed, all metal, up to 4 extruders or accessories can be mounted on the center yoke, IKO Linear Bearing Systems, large build area, integrated air-filtration system, side-mounted filament system, embedded PC, active Matrix LCD with Touch Screen, interchangeable, hot-swappable, programmable head system, change settings during builds, integrated video camera for remote build monitoring, plug-&-play electronics, remote connectivity via smart phone, Tablet or PC.
-
10-31-2013, 04:10 AM #2
- Join Date
- Oct 2013
- Posts
- 96
Looks like the guy still hasn't shipped any units to his KS backers.
-
10-31-2013, 05:34 AM #3
Wow, this looks like a great system! Very complete and well thought out, however, if he promised them to backers in 2012 and still has not delivered, where are all the units? If I shelled out thousands if dollars expecting a printer and did not get it, I would be pissed? Is there any recourse for people who fund kickstarters and don't get what they are promised? Or is it all a crap shoot?
-
10-31-2013, 08:25 PM #4
- Join Date
- Oct 2013
- Posts
- 259
Yeah John I'd be ticked off too. I actually am involved in a lot of crowdfunding advising, and the number one thing I see are people over promising and under delivering. Often times these companies do not realize just how incredible popular their product could become on Kickstarter, and end up getting in way over their heads. This causes massive delays sometimes as they need to change their production plans. That's likely what happened here.
-
10-31-2013, 08:51 PM #5
It's the Fill-a-bot all over again!
-
10-31-2013, 10:54 PM #6
- Join Date
- Oct 2013
- Posts
- 96
Promised delivery in Dec 2012-Jan 2013 to KS backers.
http://www.kickstarter.com/projects/...rel-3d-printer
Current status of those KS printers...
http://www.hyrel3d.com/queue-for-orders/
This is why I don't back anything on Kickstarter that is already on the market. The cost savings is not worth the risk. I am also very hesitant to back any project run by those under 30 years of age.
-
11-01-2013, 09:46 AM #7
KS may be a way to get something at a good price, but it's not what it's made for. KS is made to help someone get started with a project. Mostly do the "first batch" to lower the cost or ordering the first batch of stuff.
Normally, they should lower the margin by a LOT (almost to the cost of the item) to get a lot of people and having a really big "first" order. Then you can open an account with a supplier having a really low price (Most supplier do different "cost" price, depending on your first order and annual order). When it's done, you can sell the product you made at the price it should be, with the low price you have for the part... this is were you make money (not with the KS!). Many business does understand that. You may see some very small shop selling stuff at very low price and the other bigger shop will say "It's under my cost price... I can't do it !". This may only caused by the fact that the little shop do "special sales" at his own cost price (no profit) so he can have a lower cost price and sell the item at the same retail price later and do more money per sales (plus the ads that does).
You can also see (like the Peachy) someone who need money to continue R&D. It's like investing in a project. You don't know if they will have a success or not... but you trust them, think they can do it, so you help them.
If you are going to KS just to get stuff at a low price, your looking at the wrong place (even if it's mostly the case).
-
11-01-2013, 07:24 PM #8
- Join Date
- Oct 2013
- Posts
- 96
I here ya. Tell that to the 720 people backing the QU-BD 3D printer.
I canceled some pledges after finding similar stuff was already out in the market. I did buy 4 KS based products after they came to market. I got them for similar KS prices and in their 2nd revisions or so KS folks were the guinea pigs.
-
11-01-2013, 10:47 PM #9
haha.. you see.
And I know there's a lot of KS Campain just to sell a product cheap (+ for users) and make money (+ for productor). Like the QU-DB. Already fully made... just needed to sell.
-
11-01-2013, 11:42 PM #10
- Join Date
- Oct 2013
- Posts
- 96
These are a few things I bought after their kickstarter run. You don't save very much vs the risk.
Kickstarter prices (non early bird) vs price I paid.
Lumoback
KS = $125
$135 version 2 via grandst.com +coupon
Printrbot Plus
KS = $645
v2.1 $809 via a special weekend sale
Sensordrone
KS = $175
$150 via coupon due to out of stock status
Filastruder
KS = $200 - $300
$249 directLast edited by crowbar; 11-01-2013 at 11:46 PM.
Ender 3v2 poor printing quality
10-28-2024, 09:08 AM in Tips, Tricks and Tech Help