Results 1 to 8 of 8
Threaded View
-
01-15-2022, 03:12 PM #4
- Join Date
- Jun 2014
- Posts
- 887
This link may be helpful. The slicer is Flashprint, a program which converts your imported STL file and creates the print file based on the settings you use (or the default settings).
https://www.flashforge.com.hk/blog/3...r-big-3d-print
You can ignore the "big print" aspect of this link. The brim settings are shown in the page about halfway down.
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help