Results 1 to 4 of 4
Thread: Flashforge Adventurer 3?
-
12-01-2021, 06:56 AM #1
- Join Date
- Dec 2021
- Posts
- 1
Flashforge Adventurer 3?
Hi everyone,Newbie here...looking to invest into a first 3D printer and am considering the Flashforge Adventurer 3 - I want a printer that's enclosed such as this model. Someone mentioned that I will need to use their own slicer program and can't use external ones such as Cura - is this true? Also, there's version 1 and version 2 of this particular model I noticed - for version 2 is it a flexible and heated pad? I'm seeing mixed specifications, so it's confusing.I'm open to suggestion on a good beginner 3D printer that's enclosed - not too cheap though.Thank you
-
12-04-2021, 06:14 AM #2
- Join Date
- Apr 2021
- Posts
- 186
It can be quite hard to use Cura (Not impossible, but there's a lot of work involved). The firmware on the A3 is very touchy about things like decimal places, so there's sometimes a need to tweak the gcode from Cura. The FlashForge slicer it comes with isn't bad though.
The A3 was originally a horrible machine, but it underwent a few revisions and is now I think quite decent. I haven't had one for a while though. Not too much else in that price range that's enclosed.
-
12-15-2021, 08:45 PM #3
- Join Date
- Dec 2021
- Posts
- 1
Thank you so so much. This answer was very very useful to me.
-
01-08-2022, 02:07 AM #4
- Join Date
- Jan 2022
- Posts
- 2
apps
Nice to see this post here. Thanks for sharing this with us. Looking for the State News of every day? Here you can check this.
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)