Results 1 to 10 of 10
Thread: Hollow print. Help.
Threaded View
-
01-02-2022, 06:53 AM #10
Airkout
Posting the Cura Profiles created and use daily to 3D Print using a .4 nozzle up to .32mm successfully.
.32mm is max layer height at 80% of the nozzle diameter.
Give them a try and see if any will help your 3D Printed models.
For Cura 15.04.6 / creality slicer 4.8.2
If these profiles work and you want to try PrusaSlicer will post profiles or the Newer Cura versions Profiles
Sample 3D Printed Model below using single extruder printer.
Landing Pad.jpg
Holes and pockmarks in print walls
Today, 09:14 AM in General 3D Printing Discussion