Results 1 to 10 of 16
Threaded View
-
01-01-2022, 04:57 PM #3
- Join Date
- Jun 2014
- Posts
- 885
I've cut the ship in half and removed the dish at the original location (I hope), which would allow you to print with the smallest amount of supports. It might be necessary to sand away some of the hull where the dish attaches, but this was a "quick and dirty" sort of approach.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion