Results 1 to 4 of 4
Threaded View
-
11-09-2021, 02:17 AM #3
- Join Date
- Aug 2020
- Location
- United Kingdom
- Posts
- 249
For the last year I have been using a piece of 2 thou - 50 micron shim steel to level printer beds with no problems. It is a bit tight but gives excellent results even when using fast first layers. You might want to try 3 thou 76micron to see which works best for you. Not as much feel as a post it note but lasts much longer and is a known thickness.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion