Results 1 to 3 of 3
Thread: Cura 0% flow half way
Threaded View
-
10-26-2021, 06:02 AM #3
- Join Date
- Sep 2021
- Posts
- 5
It's a ender 3v2 with a 1mm nozzle cause I only print big parts and I don't really care about quality. The image is not about speed, is about flow. Those 32mm2/s are the layer height. The print is set to 60 or 80mm/s I don't really remember. The problem with flow is that the clear blue has a really low plastic flow, looks like just stringing. And the dark blue is near 0% flow wich means, print head still moves at 60/80mm/s but plastic doesn't extrude. I kind of fixed using a draft shield, but I think is a total waste of filament. So still a problem.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help