Yes! Finally. It is here. The BTT Octopus Pro..



This board has a few notable improvements over the Octopus. It can support 60v power to the stepper motors. It also comes in 2 flavors. One with a slightly faster processor with a little less flash size and one with a slightly slower processor but 2x the flash size. The difference in speed is small 180mhz vs 168mhz. 12mhz difference for 2x or half as much flash size. We should be more focused on choosing the right flash size in selecting this board.

This project took a step backwards as I removed the mainboard I was half way into wiring to use as a replacement for my IDEX. Now we can get back underway. Hopefully we will see the brightest Neo Pixel lights, yet. Out of my rigs, anyways.