Reality Thread - What printers can Actually do

[Martin_au]

I'm running a custom CoreXY, and a pair of (somewhat modified) Prusas.

Slicer is PrusaSlicer, with Cura as a backup (though becoming less of a backup as I haven't run it for ages and can't be bothered revisiting its profiles)
CoreXY is running Marlin 2.0.8.2. I'm keeping an eye on 2.0.9.x, but at this stage there's no benefit for me.

One thing I am focussed on is standardised profiles. I have a series of print profiles, a series of filament profiles, and a profile for each machine. Each of these is interchangeable, so any filament profile can be combined with any print profile and run using any machine profile (see attached).

One challenge we'll have here is that the CoreXY and one of my Prusas are running hardened 0.6mm nozzles, which will occasionally present some challenges with models designed for a 0.4mm nozzle. Likewise, the 0.4mm machines may often be slower than the 0.6mm machines.

Anyway, one print that I printed ages ago, and need to make again is this:
https://cults3d.com/en/3d-model/tool...limited-radius

It was originally printed on a Wanhao i3+ in ABS.
I'll print it again on the CoreXY. Haven't decided on the plastic yet, but probably ABS again.
It needs support from the build plate only.