Results 1 to 3 of 3
Thread: Resin funnel tip/idea
-
10-07-2021, 01:39 PM #1
- Join Date
- Nov 2020
- Posts
- 22
Resin funnel tip/idea
I got fed up of trying prop up the paper filter when try to re-bottle excess resin. I googled around and saw that many people had printed funnel solutions. One of the designs I saw looked familiar ... dishwasher salt funnel! I'm guessing most homes have a dishwasher. I do. All I had to do was print little adaptor to go between the funnel and the bottle neck.So before you go and buy, or print, a funnel, check out your dishwasher funnel. it might just do the trick. See pics. STL for adaptor attached too.
-
10-08-2021, 02:58 PM #2
or if you don't have a dishwasher (we got rid of ours years ago, much simpler and faster to just wash things up the once. rather than wash and then p0ut in dishwasher :-) - just print the whole thing.
pretty simple design.
-
10-08-2021, 05:46 PM #3
- Join Date
- Nov 2020
- Posts
- 22
Yes. I think my tip is almost certainly more handy for those in possession of a dishwasher. I most definitely wouldn't advocate buying a dishwasher just to obtain a wide-spout funnel. That would be folly.
Printing time- Is this right?
09-13-2024, 07:51 AM in General 3D Printing Discussion