Results 1 to 3 of 3
Thread: abs woe
Threaded View
-
09-25-2021, 05:25 AM #3
- Join Date
- Sep 2021
- Posts
- 1
I haven't tried ABS printing so I cannot tell much but I would say that:
ABS is a cheap printing material
It can withstand temperate very well (from 20°C to 80°C)
Please note that PLA is stronger than ABS but it has poor heat resistance properties.
PLA is mostly used for the hobby type printing
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion