Results 1 to 4 of 4
Thread: Settings for a vertical tube
Hybrid View
-
09-19-2021, 11:59 AM #1
- Join Date
- Aug 2020
- Location
- Wyckoff NJ
- Posts
- 9
Thank guys. I found the problem. A close look at the preview showed an inner wall line was discontinuous. Thinning the wall a bit got rid of that line and then it came out great! Lesson learned - analyze the preview.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion