Results 1 to 10 of 132
Thread: My 3 Color Mixing Printer
Hybrid View
-
09-11-2021, 06:17 PM #1
This printer is now 5 years old. But,....
That's right the latest version of Marlin driving an SKR Pro and a Geeetech 3 in 1 mixing hotend with 3 extruders. As I am wrapping up the last wave of building and modding I am working to put back together and restore the Creation Station. All of my printers in a row on a bench. Up and ready to print. I still have to wire up the TronXY but that wont fit on this bench anyways..
As I dig through the calibrations and fine tuning I aim to start a thread where we can debate print quality / time / and slicers between my printers and anybody else that will join in. Still trying to think of a good name for such a thread. But I have a little bit of time. I have some PLA+ coming and I do need to do some fine tuning on slicer and firmware settings to get the best possible print quality.
-
09-19-2021, 01:21 PM #2
your workbench is way way too tidy !
This is what a real world 'workstation' looks like ;-)
And if you're wondering where the computer is, it's hiding behind the monitor:
It really needs a lid as rain occasionally comes through the windows.
I could put it in a 'proper' case, I could make aproper case, But this works - so why change it lol
The three centre machines are currently 100% fit and running.
I'd show you the other half of the workshop - but I suspect you're already hyperventilating, so I'll spare you the possibility of a heart attack.
Suffice to say, you've seen the tidy half :-)Last edited by curious aardvark; 09-20-2021 at 10:08 AM.
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help