Results 1 to 3 of 3
-
09-11-2021, 02:12 PM #1
- Join Date
- Jan 2020
- Location
- Bel Air Md
- Posts
- 181
Need creality Y end stop extender wire
Hello After spending last year having a ball with ender 3 Pro, I bought a Ender Extender kit I measured the 55mm on the 4040 Y axis. everything is done except the Y end stop limit switch is too short by 3". Creality went and used a 3 conductor plug and used just two outside pins. I have 4 extender wires with 2 pin plugs, no help to me.
-
09-14-2021, 09:11 AM #2
- Join Date
- Sep 2021
- Posts
- 5
Why not just cut it in half and add the missing length with some piece of wire and some shrink tube ?
-
09-14-2021, 10:22 AM #3
- Join Date
- Jan 2020
- Location
- Bel Air Md
- Posts
- 181
NHSA When checking where nozzel would stop at front was off the bed. I moved Y axis end stop limit switch about 2-3" forward That fixed my Y stop issue
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help