Results 1 to 10 of 33
Thread: HO (1/87th) scale items
-
03-30-2014, 07:34 AM #1
- Join Date
- Mar 2014
- Posts
- 30
HO (1/87th) scale items
Items I designed and had printed at shapeways to be used in a 1/87th scale diorama. All items are based on actual prototypes and drawn from pictures.
DSC_0001.JPG
More on the diorama can be see at http://nvrr49.blogspot.com/2013/09/l...pair-shop.html
-
03-30-2014, 10:12 AM #2
- Join Date
- Sep 2013
- Location
- New Jersey, USA
- Posts
- 494
Wow man, that's amazing. What is the typical cost from Shapeways fr one of these tiny vehicles?
Made of sandstone? Some of them look metal....
-
03-30-2014, 05:54 PM #3
- Join Date
- Mar 2014
- Posts
- 30
They are for sale here: https://www.shapeways.com/model/8375...&materialId=61
and here: https://www.shapeways.com/model/8907...&materialId=61
-
04-05-2014, 03:44 PM #4
- Join Date
- Mar 2014
- Posts
- 30
I used a pill bottle as the start for an HO scale drug store model, with an apartment above. The sidewalk, doors, windows and stairs are 3d printed on my Afinia printer, including the glass block skylight.
image.jpg
Details and drawings can be seen here:
http://nvrr49.blogspot.com/2014/03/p...re-3d.html?m=1
-
04-19-2014, 06:06 PM #5
- Join Date
- Mar 2014
- Posts
- 30
I designed this from a picture of the Bennington State Bank in Bennington, MN. Design details can be seen at: http://nvrr49.blogspot.com/2014/04/b...ton-mn-in.html
-
04-19-2014, 06:14 PM #6
This is very nice. Where did you print this? Did you use a service like Shapeways? What is the size of it in inches?
-
04-19-2014, 06:29 PM #7
- Join Date
- Mar 2014
- Posts
- 30
I printed it on an Afinia printer. It is about 2.5" wide.
Thanks,
-
04-26-2014, 10:10 AM #8
- Join Date
- Mar 2014
- Posts
- 30
I just finished up this little gas station this week. \Based on a real prototype in McLean TX. I also printed it in 1/48 scale.004.jpg
Design and construction details can be seen at http://nvrr49.blogspot.com/2014/04/p...ted-in-ho.htmlLast edited by nvrr49; 04-26-2014 at 10:20 AM.
-
04-29-2014, 07:42 PM #9
- Join Date
- Mar 2014
- Posts
- 30
I just received and primed these items from shapeways, in their FUD material. More pictures and details can be seen at http://nvrr49.blogspot.com/2014/04/l...-ho-scale.html
14066858942_0182d418df_s.jpg
-
05-18-2014, 08:31 PM #10
- Join Date
- Mar 2014
- Posts
- 30
DSC_0028.jpg
This was designed in SketchUp and printed on an Afinia printer. The walls, interior and exterior, with interior doors were all printed as one piece.
DSC_0004.jpg
Design and construction details can be seen at: http://nvrr49.blogspot.com/2014/05/f...ted-in-ho.html
Ender 3v2 poor printing quality
10-28-2024, 09:08 AM in Tips, Tricks and Tech Help