Results 1 to 2 of 2
Thread: voxelab aquila 3d printer
-
02-23-2021, 05:35 AM #1
- Join Date
- Jan 2021
- Posts
- 2
voxelab aquila 3d printer
Hi alli have just purchased this printer voxelab aquila 3d printermy problem is that the hot bed plate hits the motor at the backi have raised it as far as i think i can but still hitsdoes anyone know or have any ideas , any links to video / pics etc or any advicei am with it now and still no joyregards to all
Last edited by jockcraw; 02-23-2021 at 11:01 AM.
-
08-29-2021, 12:54 PM #2
- Join Date
- Aug 2021
- Location
- Aubrey TX
- Posts
- 9
Had the same issue .... need to raise the Y Limit Switch (left pillar at bottom) and then re-level.
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help