Results 1 to 10 of 16
Thread: How do I draw this in 3d?
Threaded View
-
08-27-2021, 06:16 AM #9
- Join Date
- Aug 2021
- Posts
- 6
nozzle.jpgHows about that mate? That is an inner opening of 6mm with a 2mm wall. The V is then 6mm wide by 10mm long to the tip.
Last edited by dexyweescot; 08-27-2021 at 06:52 AM.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help