Results 1 to 10 of 11
Thread: Warping, Ultimaker 2
Threaded View
-
08-24-2021, 10:05 AM #9
- Join Date
- May 2020
- Posts
- 622
Don't forget, no part cooling fan.
Few days ago I had some PLA warp up off the bed. Moved bed temp from the recommended 45 up to 60, that cured the warping off the bed.
I've gone right off PLA, I get a much better finish with ASA.
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials