Results 1 to 10 of 11
Thread: Warping, Ultimaker 2
Threaded View
-
08-24-2021, 09:10 AM #8
- Join Date
- Jul 2021
- Posts
- 3
Hm. I'm seeing a lot of folks running much higher bed temperatures. The 80C is default on the Ultimaker for ABS. I'll try the same print/filament and raising to 94C and pre-heating a bit longer. I'd like to get reasonably good at printing reasonably square items without mouse ears, brims, etc. Thanks!
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help