Results 1 to 3 of 3
Threaded View
-
08-13-2021, 03:37 AM #3
- Join Date
- Aug 2020
- Location
- United Kingdom
- Posts
- 249
You don't say which material you are using but I assume it's PLA. One thought that comes to mind is have you inadvertently set the filament size to ,2.85 in the slicer profile when you changed filament - I did once and a similar result - nearly drove me mad until I spotted the error.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help