Results 1 to 1 of 1
-
07-29-2021, 11:21 PM #1
- Join Date
- Jul 2021
- Posts
- 1
Marlin sometimes not preheating nozzle
Anyone have marlin not preheat the nozzle (it says 245/0) when printing from SD card, but if you manually preheat first, then marlin says correctly 123/245 (as it heats up). Comes from Slic3
Printing time- Is this right?
09-13-2024, 07:51 AM in General 3D Printing Discussion