Results 1 to 1 of 1
Thread: 1st Layer on supports HELP
-
07-23-2021, 10:31 AM #1
- Join Date
- Jul 2021
- Posts
- 1
1st Layer on supports HELP
Hello!I´m new in this 3d print stuff and I´m having some trouble printing the 1st layer on supports (image attached).My nozzle is at the right distance and temps are 80ºc table, 220ºc left nozzle with PLA and Right nozzle at 220ºc using Polydissolve by Polymaker.My PLA is also from Polymaker.And my printer is the Raise 3d Pro 2.If somebody could help me I would be gratefull.Sorry if I made some mistakes in English but It´s not my 1st language.Good prints guys!Thank you.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help