Results 1 to 5 of 5
Thread: I have problem with printing
-
07-22-2021, 03:05 AM #1
- Join Date
- Jun 2021
- Posts
- 5
I have problem with printing
Hello guys, I am facing such a problem. Anyone know why this is so?
I was always getting very good prints, but for 2 days now I am facing this problem.
https://i.hizliresim.com/jjggtqh.jpg
https://i.hizliresim.com/khhz9vg.jpg
Creality ender 3 v2 , abg --- pla filament ,200 deegre noozle , 60 deegre table
-
07-22-2021, 07:18 PM #2
Looks like a clogged Hot-end, This could be from the Teflon Tube melting or over heated filament that will not extrude.
A good cleaning of your hot-end will solve this problemLast edited by Roberts_Clif; 08-08-2021 at 04:15 PM.
-
08-18-2021, 03:08 AM #3
- Join Date
- Aug 2021
- Posts
- 1
This problem must be annoying, have you tried to contact the company that produces the printer?
-
08-23-2021, 01:44 PM #4
-
08-25-2021, 07:45 AM #5
- Join Date
- Jun 2020
- Location
- South Carolina
- Posts
- 55
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion