600 bulks in my hands now,looking for a reliable FDM 3D printers, any recommanded?

[curious aardvark]

well if I was going for a big cheap i3 - the adimlab gantry pro 3d.
https://www.amazon.com/ADIMLab-Assem...s%2C311&sr=8-5

It's the only one I know of that has all the critical prusa I3 design components.
1) direct drive extruder
2) bed side support rails
3) dual z-axis motors

Personally those are the main points I loook for in an i3.

[Roberts_Clif]

It's the only one I know of that has all the critical prusa I3 design components.
1) direct drive extruder
2) bed side support rails
3) dual z-axis motors

Personally those are the main points I loook for in an i3.

ADIMLab Updated Gantry Pro 3D Printer

As I look around an see that most of the 3D Printers with a large print area are all going to a single Y-Axis monorail support.
Y-Axis monorail support have a lot to be desired causing more problems than are worth, will be agreeing with curious aardvark choice.

[Denial11]

Are you want to invest in the crypto market but don't know how to start the process of investment in the crypto market, you have a lot of confusion to make your decision that where to start and how. Let,s know the easiest way to buy cryptocurrency. In the crypto market, there are many choices that help you to invest but it is difficult to choose any one option among them, Except all of them you need to verify that option s just like purchase any assets.Sources>>https://www.cryptoknowmics.com/news/...cryptocurrency

[ebir909]

well if I was going for a big cheap i3 - the adimlab gantry pro 3d.
https://www.amazon.com/ADIMLab-Assem...s%2C311&sr=8-5

It's the only one I know of that has all the critical prusa I3 design components.
1) direct drive extruder
2) bed side support rails
3) dual z-axis motors

Personally those are the main points I loook for in an i3.

Oh I see. I will buy it ASAP.

[3BAprinting]

YES! 10000%. I rarely have issues with my flashforge printers, but my ender broke daily until I gave up and modded everything on it.

[3BAprinting]

Flashforge creator pro 2 is really nice. The creator pro 1 I did not really like, because the big print head caused ringing if I printed too fast.