Results 1 to 5 of 5
-
01-07-2021, 12:13 AM #1
- Join Date
- Jan 2021
- Posts
- 2
Does this look like over extrusion late in the print?
IMG_9515.jpg The print in the foreground failed yet remained firmly adhered to the bed (glue stick over painters tape). I aborted the print after the extrusion head assembly started bumping against the print. Any ideas on how to avoid this happening? Printer with cura on a Printrbot Simple Metal. 200f heat, 1.75 PLA, 60 speed.
-
01-07-2021, 09:57 AM #2
what sort of print area cooling does it have ?
If none look on thingiverse for some mods.
Could just be that.
-
01-08-2021, 02:32 AM #3
- Join Date
- Jan 2021
- Posts
- 2
-
07-14-2021, 05:54 AM #4
Guys, I don't know if this is the perfect forum to talk to, but I wondered if anyone heard about the https://jpg2pdfconverter.com/ converter? I have some files that are in jpg, and I need to convert them into pdf format. So a friend of mine recommended me that website. But I want to hear your thoughts too before making a decision. So in case, someone had the experience working with the website I've shared, feel free to text me. I will be grateful. Hope you guys are having a good day.
Last edited by Orbeck; 07-18-2021 at 09:43 AM.
-
07-19-2021, 03:01 AM #5
- Join Date
- Jul 2021
- Posts
- 26
It might also be because you have too little cooling, so your nozzle drags through the molten plastic and deforms it, before it cools down.
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help