Results 1 to 2 of 2
-
07-06-2021, 05:16 AM #1
- Join Date
- Jul 2021
- Posts
- 1
Help, Print with a slope through the back (+y)
Hi all,
My Ender 3 Pro has started to print with a slope through the back of the printer. Every subsequent layer is printed to the position that is shifted through +y direction.
-I loosened/tightened the y axis bent
-Loosened/tightened the x axis right pole wheels
- Removed and replaced the z axis bar
PHOTO: https://ibb.co/Jz8gVGw
Nothing changed
Any recommendations?
-
07-08-2021, 04:11 PM #2
- Join Date
- Jun 2021
- Posts
- 14
I would first suggest working thought all calibrations first:
https://www.youtube.com/watch?v=rp3r921DBGI
https://teachingtechyt.github.io/calibration.html
Has this been a "new" development? Did you do anything to the printer recently? Is it possible your acceleration and speed is too high causing your bed to shift? You may have to check your slicer settings too
Ender 3v2 poor printing quality
10-28-2024, 09:08 AM in Tips, Tricks and Tech Help