Results 1 to 10 of 49
Hybrid View
-
07-01-2021, 06:13 AM #1
- Join Date
- Aug 2020
- Location
- United Kingdom
- Posts
- 249
Hi how are you connecting to the printer are you using Prontface
-
07-01-2021, 03:28 PM #2
- Join Date
- Sep 2020
- Posts
- 48
Today, I was able to connect my printer to my PC using Pronterface. Windows wanted a driver file, and it took awhile for me track down what it wanted, the CH340. Once I loaded that, I was able to connect using Pronterface, and ran G code suggested by Martin_au, and got this....
SENDING:M119
Reporting endstop status
x_min: open
y_max: TRIGGERED
z_min: TRIGGERED
z2_min: TRIGGERED
z2_max: open
z_probe: open
-
07-02-2021, 04:16 PM #3
- Join Date
- Sep 2020
- Posts
- 48
I decided to go back to the dual Z-axis limit switches to see if I'd have any better luck there. I ran Pronterface while I tested homing on the X, Y, and Z axis. X and Y were fine, Z ran until it crashed into the limit switches and tried to keep going. Here is the Pronterface output. I have an MP4 video as well, but it looks like that file type isn't allowed on the forum. I've sent this to TwoTrees, but thought I'd ask here as well.Connecting...Printer is now online.>>> M119SENDING:M119Reporting endstop statusx_min: openy_max: openz_min: openz2_min: openz2_max: openz_probe: openecho:enqueueing "G28 X0"echo:Active Extruder: 0echo:busy: processingecho:busy: processingecho:busy: processingecho:Active Extruder: 0>>> M119SENDING:M119Reporting endstop statusx_min: TRIGGEREDy_max: openz_min: openz2_min: openz2_max: openz_probe: openecho:enqueueing "G28 Y0"echo:Active Extruder: 0echo:busy: processingecho:busy: processingecho:Active Extruder: 0>>> M119SENDING:M119Reporting endstop statusx_min: TRIGGEREDy_max: TRIGGEREDz_min: openz2_min: openz2_max: openz_probe: openecho:enqueueing "G28 Z0"echo:Active Extruder: 0echo:busy: processingecho:busy: processingecho:busy: processingecho:busy: processing>>> M119SENDING:M119echo:busy: processingecho:busy: processingecho:busy: processingecho:busy: processingecho:busy: processingecho:busy: processing[ERROR] Can't read from printer (disconnected?) (SerialException): call to ClearCommError failed[ERROR] Can't write to printer (disconnected?) (SerialException): WriteFile failed (WindowsError(5, 'Access is denied.'))
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion