Results 1 to 10 of 10
Thread: "Double-shot" SLA sort of
Threaded View
-
06-19-2021, 08:14 PM #5
- Join Date
- Jun 2021
- Posts
- 5
If was going to use FFF, I would use a dual extruder. Prusa has a multi-material upgrade for another $300, but I haven't heard much about how well it performs. What I have seen are huge purge blocks, with what seems to be 50% waste of material. I'll be looking hard at other options.
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion