Results 1 to 10 of 14
Threaded View
-
06-14-2021, 06:29 AM #9
This is nearly exactly what happened to my 3D Prints though the clog was because of a throat with a PTFE liner slid into to nozzle Note the nozzle in the Image on right. you will see the PTFE tubing inside the Nozzles. The nozzles are setting inside a lead screw nut only for the picture.
Nozzle & Throat.jpg
After Replacing both the Throat and nozzle the 3D Printer now print correctly.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion