Results 1 to 10 of 13
Threaded View
-
05-27-2021, 05:37 PM #10
- Join Date
- Apr 2021
- Posts
- 30
she had probably saved him then. however I created a gcode with the m301 and m8500 command and I sent it to print .. now the temperature seems to have improved .. the variations remain +/- 2 now. I took the retraction test. has improved but the lines remain. How can i enable retraction in firmware?
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)