Results 1 to 3 of 3
Thread: Ender 3 v2, first layer problems
-
04-08-2021, 05:22 PM #1
- Join Date
- Apr 2021
- Posts
- 4
Ender 3 v2, first layer problems
Hi all,Can somebody explain this to me. I have a print that I am using a raft on, after raft completes, which looks pretty good, the very first layer of my actual print is all rippled. How can the raft be perfect and 5 layers in the print go to crap? I have good bed leveling and stickiness. I had already pulled the print from the bed as to why you see the raft not stuck to the bed.
Thank you
IMG_5759.jpg
-
05-01-2021, 09:54 AM #2
- Join Date
- Apr 2021
- Posts
- 4
Without the raft I still get the ripples. I have found that turning my bed down to 50 from 60c I don't get the waviness of the print. Now why is that?
-
05-20-2021, 08:08 PM #3
- Join Date
- Apr 2021
- Posts
- 4
more on this, it appears the the bed was not as smooth rolling as it could be, meaning when it rolled back it was moving to just a hair so the lines would bulge into one another. Cleaned the rollers and the rail and so far it's printing perfect.
Holes and pockmarks in print walls
Yesterday, 09:14 AM in General 3D Printing Discussion