Results 1 to 8 of 8
Thread: Level / Printing Issues
Threaded View
-
05-17-2021, 07:57 AM #3
- Join Date
- May 2021
- Posts
- 19
A: My adjustments did not resolve all my issues. I was able to get a little head way but still 3/4 of my prints would fail due to adhesion for the most part.
B: Heard back from Qidi, they are sending me a new build plate / told me in the mean time to put some paper under the magnetic plate on the corners to try and even it out. So will try that when I get home later tonight and see if that helps any after I retighten all the screws ect.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion