Results 1 to 6 of 6
Threaded View
-
05-15-2021, 09:18 PM #6
- Join Date
- Apr 2021
- Posts
- 186
Done this a fair bit. What you're looking for is what's commonly known as a reversed bowden. An additional benefit is that if the filament is hard to pull from the spool, it doesn't transfer the force through the extruder and X-gantry. Instead the force is directed back to the start of the bowden tube.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion