Results 11 to 12 of 12
-
05-15-2021, 09:22 AM #11
- Join Date
- Apr 2021
- Posts
- 30
found the problem.. the axis of extruder is crocked... does it have a verse?
Last edited by shakle; 05-16-2021 at 11:25 AM.
-
05-15-2021, 12:11 PM #12
- Join Date
- Apr 2021
- Posts
- 30
fixed the problem. The extruder axis was obviously bent. the distance of the two extremes were different.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion