Results 1 to 10 of 103
Threaded View
-
05-12-2021, 07:18 PM #11
- Join Date
- Apr 2021
- Posts
- 70
with the glue after the fans finally kicked on the print almost worked but one little joint had come loose and moved away when I came back to check on it.
With the voxel I ended up using a raft on everything. It seems like that shouldn't be necessary but I am nearly at my wits end. It just takes so very little to disturb and displace these tiny little pieces and once it does the whole hours long print is ruined.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help