Results 1 to 8 of 8
Thread: Sapphire Pro Thermistor
Threaded View
-
05-12-2021, 12:42 PM #2
HT-NTC100K Thermistor
According to this replacement on alixpress: https://www.aliexpress.com/i/4000852409068.html
https://www.amazon.co.uk/Printer-The...&rps=1&sr=8-14
And as usual it's cheaper to buy three than one.
I'm really not sure the chinese actually understand the economy of scale.
The number of times I just want to buy one thing and it works out cheaper to buy 5 is crazy.
0.5mm nozzles a classic example, I wanted 2.
Buying just 2 0.5mms was about £12.
Buying an assortment of nozzle sizes to the tune of 20 nozzles (2 of each size) and some other random bits and peices - was £2 cheaper.
Utterly mental.
Same with heatblocks. Wanted one heatblock.
Ended up with 5 blocks, 5 metal threaded throats and another 20 bloody nozzles and some random bits of tubing that always seem to be thrown into the packets.
Also - going back to the actual topic: this is what it says in the configuration file:
#1: 100k thermistor£»-3 : thermocouple with MAX31855
I'll buy a spare off you - already buggered up an endstop when i modded the extruder.
Spares are never wasted lolLast edited by curious aardvark; 05-12-2021 at 01:03 PM.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion