Results 1 to 10 of 10
Threaded View
-
04-29-2021, 03:37 AM #5
- Join Date
- Apr 2021
- Posts
- 5
Hi, thank you for your advises. I tried to print with this settings. You can see here https://imgur.com/a/mSY3eNo there is not much stringing left but for some reason the "right tower" is not printed well looks like the layers are not properly connected. But the other tower is strong and stable. What setting can cause a behavior like this? Or could this be an issue with the .stl file itself?
Last edited by D4rki1991; 04-29-2021 at 07:10 AM.
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)