Results 1 to 3 of 3
Thread: Help me pick first 3D printer!
-
04-25-2021, 11:22 PM #1
- Join Date
- Apr 2021
- Posts
- 2
Help me pick first 3D printer!
Once again a 3D newbie needing printer suggestions!!- Located in Canada- Budget around $1000- looking to use Filament- want a reasonable sized heated base (mainly printing cookie cutters ???*), but would later like to use it for some cool thingiverse projects!- pretty good with PCs and design software- don’t necessarily need “plug and play”; but the less fidgeting and tweaking needed the better- ok with putting basic kit together (no soldering etc)- will go in basement office (with extraction fan/ventilation) if needed- noise not really an issue Any suggestions?
-
04-26-2021, 06:45 AM #2
https://www.amazon.ca/TENLOG-TL-D3-P...437338&sr=8-55
My currnt machine of choice.
decent nuild volume, idex direct drive extruders. Linear rails, silent stepper drivers and basically the best specced i3 around at the moment.
And $200 off with coupon so at $699 canadian an absolute bargain :-)
-
04-28-2021, 10:59 PM #3
- Join Date
- Apr 2021
- Posts
- 2
Thank you for your suggestion CA! Ordered and on its way ???????? Glad to have snagged it while there was a coupon.
Holes and pockmarks in print walls
Today, 09:14 AM in General 3D Printing Discussion