Results 1 to 10 of 28
Thread: Screw Holes and Solid Infill
Threaded View
-
04-05-2021, 03:38 PM #10
I agree with CA that I typically just let the bolt cut it's own threads, but it takes some experimentation to get the printed hole sized right to make this work. I've also found that the finer pitch on metric bolts is far easier to do this with than with equivalent imperial sizes. For example, I find it far easier to thread in an M3 bolt than a 4-40 bolt.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion