Results 1 to 10 of 15
Threaded View
-
03-31-2021, 07:58 AM #4
- Join Date
- Mar 2021
- Posts
- 6
Thanks for the advice. i managed to get some good results for some prints by heating the bed to 110 Deg first layer then 95 for the rest of the print. this only works on big first layer movements, small circles or intricate movements (such as the bottom text on a Benchy) seems to peel up and stick to the nozzle, i am running the first layer at 1, yes 1 mm/s for the speed. this seems to fix the issue.
and i have used 5 different spools of PETG, only 1 adheres, Grey EONO from amazon!!!
show how tricky this is, but i have got something to work some how. so only up from now on i hope
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help