Results 11 to 20 of 41
Thread: Einscan-SE to SP conversion
-
03-09-2021, 01:19 AM #11
- Join Date
- Sep 2017
- Posts
- 5
Hello everyone,
after a long break I am back with a new gift for all of you.
This is how you convert your Einscan-SE to Einscan-SP with a small software patch:
You need a hex editor to do this. I am using HxD and the Einscan EXScan S v3.0.0.1
1. Download any Hex Editor. (HxD)
2. Search following HEX pattern and replace in file sn3dscan.dll
F6 48 89 75 7F 66 66 66 0F 1F 84 00 00 00 00 00 -> F6 48 89 75 7F E9 8A 89 05 00 90 90 90 90 90 90
A8 B1 FF FF 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -> A8 B1 FF FF 45 0F BE 6C 24 28 41 83 FD 02 75 13 43 C6 84 37 99 39 00 00 02 66 0F 19 04 00 E9 57 76 FA FF 43 C6 84 37 99 39 00 00 03 66 0F 19 04 00 E9 44 76 FA FF
3. Go back to where you can choose the scanner type and click on Einscan-SP.
Share your findings and tests here in the forum. This was only tested by one beta-tester but should work for everyone.
Have Fun!
-
03-18-2021, 02:04 AM #12
- Join Date
- May 2020
- Posts
- 4
Hi eychei,It works like charm! I do realize it scans faster now, have not yet test if it has better accuracy or resolution.Thanks a lot!!
-
03-28-2021, 02:07 PM #13
- Join Date
- Mar 2021
- Posts
- 3
Hello. I just upgraded my einscan se to the SP version and it works! Thanks for the tip. In terms of performance, for a scan from the rotary table (8 positions) the scan puts 1 "56 with the Einscan SE interface and 1" 01 with the Einscan SP interface! A nice time saver!
For the quality, it is difficult to distinguish a change given the quality already present and the object with which I tested.
-
03-28-2021, 02:28 PM #14
- Join Date
- Mar 2021
- Posts
- 3
Capture Einscan SE.JPGHere is the scan with einscan SE interface
-
03-28-2021, 02:28 PM #15
- Join Date
- Mar 2021
- Posts
- 3
Capture Einscan SP.jpgHere is the scan with einscan SP interface
-
04-11-2021, 07:39 AM #16
- Join Date
- Apr 2021
- Posts
- 3
Confirmed, this works. Did this last evening in about 5 minutes. Important to note for some:
1)When using the search function of your hex editor, ensure you are searching for Hex values, not text-string.
2)It appears as though this doesnt disable the software from using it as SE so thats nice. It enables it to work as SP.
I didnt complete any scans last night, but when doing partial scans, the time difference was noticeable. Much improved. Next scans I will compare details of the scan. Well done eychei!!!!!
-
04-21-2021, 10:44 AM #17
- Join Date
- Apr 2021
- Posts
- 3
If you want to print out the targets for the turntable someone has added a pdf and svg of them in thingiverse. This should increase quality https://www.thingiverse.com/thing:3050387/files
Last edited by noaccountingfortaste; 04-21-2021 at 04:48 PM. Reason: adding text
-
05-19-2021, 01:37 AM #18
- Join Date
- Apr 2021
- Posts
- 4
Thanks, very practical reminders!
-
06-23-2021, 06:29 PM #19
- Join Date
- Jun 2021
- Posts
- 6
Hello,
Ex Scan 3.1 is out and the patch from eychei no longer works.
The first hex patternalready there but the second one doesn't.
Replacing new sn3dscan.dll by the old one induces an error.
@eychei : can you help for this v3.1 ?
-
07-05-2021, 01:15 AM #20
- Join Date
- Mar 2021
- Posts
- 6
Is the work of the patch very important to you?
Ender 3v2 poor printing quality
10-28-2024, 09:08 AM in Tips, Tricks and Tech Help