Results 1 to 3 of 3
Thread: First layer warping issue
Hybrid View
-
03-22-2021, 01:26 PM #1
first off - pla works best with a heated printbed, anyone who tells you otherwise is an idiot :-)
65c work best.
Second: what slicer are you using ?
And how do you calibrate the printbed ?
Ie: properly by hand or with a topographical sensor ?
And, no you shouldn't need supports on that bowl.
Your extrusion temp is fine, just looks like you're printing the first layer too far away from the bed.
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help