Results 1 to 10 of 17
Threaded View
-
03-12-2021, 06:46 PM #9
What profile in the slicer are you using? Standard ought to be fine.
Scad creates the .stl file. Load that into the slicer (Cura) and copy the item there.
What profile in the slicer are you using? Standard ought to be fine.
Scad creates the .stl file. Load that into the slicer (Cura) and copy the item there.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion